Button Description; Installation Requirements - Fs S5500-48T6Sp-R Schnellstartanleitung

Button
SWAP

Installation Requirements

The installation site must be well-ventilated. Ensure that there is adequate air ow
around the switch.
Avoid to damage devices by following the electrostatic discharge prevention procedure.
Do not open the enclosure of the switch to prevent the reverse of the cool air ow.
Be sure that the switch is level and stable to avoid any hazardous conditions.
Do not install the equipment in a dusty environment.
The installation site must be free from leaking or dripping water, heavy dew, and
humidity.
Be sure that the rack and working platforms are well-earthed.
Please prepare screws and cage nuts for rack mounting.
Description
Swap function, used to switch PoE indication.
3