Electrical Safety - Royal Catering Rczc-1200E Betriebsanweisungen

device is designed to reduce noise emission risks to a minimum, taking into account technological progress and
noise reduction opportunities.
Legend
The product satisfies the relevant safety standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER! Applicable to the given situation.
(general warning sign)
ATTENTION! Electric shock warning!
ATTENTION! Hot surface, risk of burns!
Only use indoors.
PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may
differ from the actual product.
2. Usage safety
ATTENTION! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury or even death.
ATTENTION! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in serious injury or even death.
The terms "device" or "product" are used in the warnings and instructions to refer to:
Candy Floss Machine
Mini Candy Floss Machine
2.1.

Electrical safety

a) The plug has to fit the socket. Do not modify the plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes, heaters, boilers and fridges. There is an increased risk
of electric shock if the earthed device is exposed to rain, in direct contact with a wet surface or
operating in a humid environment. Water ingression into the device increases the risk of damage to
the device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only in accordance with its designated use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat sources, oil, sharp edges or moving parts.
Damaged or tangled cables increase the risk of electric shock.
e) If working with the device outside, make sure to use an extension lead suitable for external use. Using
an extension lead suitable for external use reduces the risk of electric shock.
f) If using the device in a humid environment cannot be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of electric shock.
g) The shell of this equipment must be grounded for safety sake.
EN