Wolkenstein WMO 14 Bedienungsanleitung Seite 101

1. Switch off the entire appliance.
2. Disconnect the appliance from the mains (fuse box of your household power
supply).
3. Contact your aftersalesservice.
Check the schedule below before you contact your aftersalesservice.
POSSIBLE
THE
The appliance is not supplied with
energy.
You have not set a temperature.
You have not set the timer27.
The heating element is defective.
THE
The illuminant is loose or damaged.
NOISE
The cooling-fan the appliance is
equipped with28 protects
electronics from being overheated.It
may continue to run even after you
have switched the a
@ If the appliance hasa malfunction not notedon the schedule aboveor if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales
27 Depending on model.
28 Depending on model.
EMERGENCY
MALFUNCTION
CAUSES
APPLIANCE DOES NOT WORK AT ALL.
THE APPLIANCE DOES NOT HEAT.
INTERNAL LIGHT
CAUSED BY THE FAN INSIDE
the
liance off.
service.
WOI,KENST€IN
MEASURES:
MEASURES
Check that the
connected to the
household fuse box. Is there a power
failure at your place of residence?
Set a temperature.
Set the timer.
Please contact the aftersales
DOES NOT WORK.
Tighten or replace the illuminant.
THE APPLIANCE.
Normal operating condition. Do not
disconnect the appliance from the
mams while the fan is running.
appliance is
mains. Check the
service.
101