BE QUIET! PURE POWER 11 700W CM Bedienungsanleitung Seite 4

INTR.DUCTI.N
We are de!!gtited ttiat you have chosen to use a be qน‫ا‬et‫ ا‬Pure Power 11 PSU in
your PC. Please read and follow all the information contained in ttiese instructions
carefully prior to installation. Should you have any further questions, please contact
our customer service. See contact Information in item Manufacturer's details.
2. SAFETY INSTRUCTI.NS
Δ
the power supply is only guaranteed to function properly if the
instructions are followed.
Caution: Only use ttie supplied cable set. Using cables that were not included (e.g.
cables of older power supply unit series) may lead to defects!
hlever open the power supply case. The electronic components inside the case
generate a high voltage that is dangerous to humans. Even after disconnecting
the power supply from the network, some parts still have high voltages. For this
reason, a power supply adapter should only be opened by an authorised tectinician.
Opening the device voids your warranty.
- Never liandle the power supply with wet or damp hands when in operation.
" Never insert objects into the power supply's apertures/fans.
" Note ttiat ttie power supply is designed for use indoors in conditions without
high levels of moisture In ttie ambient air. Using the power supply outdoors will
lead to serious damage.
" hlever work on the power supply while it is connected to the mains. In this case,
always set the power switch to "0" and / or disconnect the power plug.
" In the event of a short circuit in the device, unplug ttie mains cable and do not
use the device.
Make sure that your PC is not located directly next to a treating system or any other
source of heat.
Make sure that your computer case is sufficiently ventilated by means of additional
fans; with today's complex and powerful systems a power supply is incapable of
dissipating the treat produced in ttre PC case without additional support.
If you want to clean your power supply, disconnect it completely from the mains
and never use a damp cloth or cleaning agent. Clean the power supply from the
outside using a dry cloth.
4