Gold Note PH-10 Bedienungsanleitung Seite 15

I TROUBLESHOOTING
PROBLEM
Matching the cartridge with
the PH-10
Buzzing noise coming from
the loudspeakers.
CAUSE
The MC cartridges need
specific impedance
values.
The MM cartridges
usually need a 47 KQ load.
The phono stage is
very sensitive to the
surrounding environment.
The ground connector is
not connected correctly.
The cables are not
connected properly.
The listening volume is
very high while no music
is playing.
8
SOLUTION
Refer to the
manufacturer's
specifications to set up
MC cartridges.
MM cartridges do not
require any adjustment.
The PH-10 has a fixed
capacitance of 330pF.
Try different placements
of the phono stage
and ensure that the
environment is not
affected by RFI/EMI.
Always use shielded
cables.
Try to connect and
disconnect the cables and
ensure they are working
properly.
Always connect the
interconnect input to test
how the phono stage
performs.
High performance phono
stages will produce a
buzzing noise when the
volume is too high. It's
normal when no music is
playing and with MC gain
selection.
EN
DE