RUSTA Dual Gebrauchsanweisung Seite 12

Cooking without synchronisation:
Start cooking at the same time for both zones.
1. In Standby mode, select a zone by pressing the button for that zone. Set the zone by
either selecting preset programs or choosing a manual setting.
2. Then select the second zone by first pressing the button for that zone and then
choosing the desired setting.
3. Press the ON/OFF button to start both zones at the same time.
Different start times for the zones:
1. In Standby mode, select a zone by pressing the button for that zone. Set the zone by
either selecting preset programs or choosing a manual setting.
2. Press the ON/OFF button to start cooking for the selected zone.
3. Select the second zone by first pressing the button for that zone and then choosing
the desired setting.
4. Press the ON/OFF button to start cooking for the selected zone.
When the air fryer is finished, a beep will be heard and the display will show "OFF".
After a while, it will return to Standby mode.
NOTE: The appliance is manually turned off by pressing
the power button for 2 seconds.
NOTE: During cooking, if you remove the frying basket/baskets,
the display shows "OPEN". The zone stops. Replace
the frying basket/baskets and the air fryer continues.
Pause both zones:
1. Press the ON/OFF button to pause both zones at the same time. The display
starts flashing.
2. Press the ON/OFF button again to restart both zones.
3. If both zones have been paused for more than 5 minutes, the air fryer enters
Standby mode.
Stop both zones:
1. Press the ON/OFF button for 2 seconds. Both zones stop and the display shows "OFF".
2. The air fryer then enters Standby mode.
Pause one zone
1. Select the zone by pressing the button for that zone.
2. Press the ON/OFF button. The zone pauses and the display starts flashing.
3. Press the ON/OFF button again. The zone restarts.
4. If the zone has been paused for more than 5 minutes, the air fryer enters
Standby mode.
12