• The fog liquid should be clear and not polluted. The bottle cap should be screwed tightly after filling in the fog
liquid.
• When the fog machine worked 40 hours continuously, please use 80% of distilled water and 20% of white
vinegar to clean the impurities which accumulated inside the heating tube
• Remove the nozzle before the fog machine is warming up. Use vinegar to clean it and keep clear
• Pour out the fog liquid and fill the tank with the distilled water/vinegar mix as above. Switch on the power and
the machine will warm up.
• Operate the fog machine in a well ventilated area until the distilled water/vinegar mix has been used up. Fill
the unit again with fog liquid and operate it in an open space until the vinegar smell has disappeared.
OTHERS INSTRUCTIONS :
• Fog machines may jam easily because of impurities in the fog liquid. Therefore, a periodical maintenance will
lengthen the life time of the machine.
• Please use a dry cloth for cleaning, please clean the machine thoroughly before you store it.
SPECIFICATIONS
Voltage .......................................................................................................................... 220V-240V~ 50/60Hz
Power .................................................................................................................................................. 1000W
Fuse ........................................................................................................................................................... ?A
Warm up time .............................................................................................................................. 3-5minutes
Max. continuous operating time .............................................................................................. 15-20 seconds
Max. spray height ......................................................................................................................Approx. 5-8m
Fog output............................................................................................................................... Approx. 850m
LED source ................................................................................................................................ 12 x 3W RGB
Remote control battery .................................................................................................... Alkaline E23A / 12V
Tank capacity ............................................................................................................................................1.2L
Weight ................................................................................................................................................... 4.2Kg
Dimensions .................................................................................................................... 290 x 230 x 170mm
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe recycling.
4
SPRAY-COLOR-1000
©Copyright LOTRONIC 2024
3