Werbung
7.Display:
•Signal strength (see icon in the KEY A): 5 levels of strength, higher level means stronger signal.
•Battery status (see icon in the KEY A): Shows the current battery status. Condition: full charge, 3/4 charge, 2/4 charge,
1/4 charge, low battery. Charging time: 8 hours with the provided charger.
•Low battery indicator: When the parent unit battery charge is low (below 20%), the low battery icon will be displayed on
the screen. When the battery charge is less than 10%, the flashing red battery icon will be displayed, meanwhile an alarm
will sound every 3 seconds until the parent unit turns off automatically.
MAIN MENU ON THE RECEIVER
PRINCIPLE OF WORK: To activate the functions, press the "OK" and "MENU" button (PU.1-7) - the display shows the main
menu. Using the cursors for movement up/down (▲&▼), left/right (&), you can move through the menu and
submenu of each function. To confirm the selected function, press "OK". To exit the selected function, press the back
button (PU.1-4).
1.ADD/REMOVE CAMERA: The parent unit can be connected to 4 different cameras from the same model.
•Add Camera: Press the MENU key (PU.1-7) on the receiver. Use the cursors for movement up/down (▲&▼), left/right
(&), until you reach the Camera icon (see key A). Again using the cursors, select the "Add Camera" icon (see key A).
Press OK to confirm. When the Connect (PAIR) sign appears on the screen, press and hold the Connect (PAIR) button for
about 30 seconds, which is located on the transmitter (baby device). The successful pairing icon (see legend A) should
appear on the screen.
•Another way to connect the chosen camera to the parent unit. Press and hold the PAID button, on the bottom of the
camera you will find it, for about 3 seconds. The on/ off indicator will start flashing. After that, select the preferred
camera and press OK key on the parent unit (the step is same as above). The receiver will connect to the transmitter (the
camera) and a real time image will be displayed from the selected camera.
•Delete Camera: Press the MENU key (PU.1-7) on the receiver. Select the Camera icon (see key A). Using the cursors
select the "Delete Camera" icon (see key A). Press OK to confirm. You will be requested to reconfirm your choice with
"YES" and "NO". After pressing "YES", press OK again to remove the camera.
•Split-Screen Function: The baby monitor has a "Split Screen" feature. When 2 cameras are paired, the images from the
two selected cameras will be displayed simultaneously side by side on the monitor screen. When 3 or 4 cameras are
paired, all images will be displayed split on the screen in real time.
2.NIGHT LIGHT OPTION: The baby unit (camera) has a night lamp function with 8 available colors.
•Controlling the night light mode from the receiver: Press the main menu button (PU.1-7). Use the cursors to reach and
select the Night Lamp icon (key A). Again using the motion cursors, select the desired night light color. Press OK to
confirm.
•By pressing the ON/OFF button (see key A), you can turn the night light on or off. If you want to cycle through the 8
colors with a time interval of 1 minute for each color change, select the color cycle icon (see key A). To exit the selected
function, press the exit button (PU.1-4).
•Controlling the night light mode from the camera: By pressing and holding the night light button on the camera (see
key A ), you can turn it off. By pressing and holding the button again, you can switch to the desired light color.
3.ADJUSTING THE SOUND LEVEL AND BRIGHTNESS: Press the Volume/Brightness button (PU.1-3). The "Volume" and
"Brightness" icons will appear on the display (see key A).
• Press the left and right buttons(&), to choose your preferred sound level.
• Press the up and down buttons (▲&▼), to select your preferred brightness level.
To exit the selected function, press the exit button (PU.1-4).The unit has 6 brightness levels and volume control. The
default settings of both functions are automatically adjusted to level 4.
4.LULLABIES: Press the MENU button (PU.1-7). Use the cursors for movement up/down, left/right to reach and select the
the lullaby icon (see key A). Use the cursors for movement up/down, left/right to to select the melody you want or select
the "Play entire loop with 8 lullabies" icon ( see key A) - then, all the melodies will be played one by one. Press OK to
confirm. Press the "Stop/Pause Music Player" icon ( see key A) to stop the music. To exit the function, press the exit
button (PU.1-4). By default, the music player settings are turned off.
5. ENERGY SAVING MODE: This mode allows you to control the sound activation of your baby unit. The LCD display only
turns on when the baby unit picks up sound. If there is no sound around the camera within 30 seconds, the video display
turns off to save power. When the baby unit detects any sounds louder than the selected sensitivity level (low, medium,
high), it will start transmitting a signal to the parent device again and turn on the receiver screen. To set the device to ECO
function, follow these steps: Press the MENU key. Use the cursors up/down, left/right to reach and select the "Save
Energy" icon (see key A). Using the left/right movement cursors (&), select your desired sensitivity level (low,
medium, high). Press OK to confirm. To exit the function, press the exit button (PU.1-4).
•Low sensitivity level icon (key A): High threshold value of sound sensing before the function is activated
20
Werbung
