Werbung
IMPORTANT INFORMATION FOR THE BATTERY OF THE RECEIVER (PARENT UNIT)
1.Before first time use charge the battery completely.
2.The Baby Camera is with a built-in LI-ion battery 3.7V/ 4000 mAh.
3.The built-in rechargeable battery cannot be taken out of the product
BATTERY CHARGING SHOULD ONLY BE DONE BY AN ADULT!
WARNING!
•Always use only the rechargeable battery and adapter provided with the bought product. NEVER USE battery or charger
of other brand or another product.
•Children are not allowed to handle the adapter. Only an adult must handle it. After charging you must always store it at a
place out of the reach of children. The adapter is not a toy.
•Before you start charging the product you must check whether the adapter, battery and cables are in good working
order. If there is damage on any of these parts, you must stop using them, until the damage is removed.
•We recommend you leave the camera to charge completely before next use in order to prolong its battery life.
•The battery gradually discharges, even if the parent unit is turned off. Advice: To save the battery, turn off the parent
unit, when you are not using it.
•WARNING! Charge the receiver completely for 8 hours before first use of the product.
•If the battery is damaged or cannot hold any charge, do not try to open the product by yourself. For consultation and
repair, contact the shop, from which you bought the product or the importer/ distributor.
•The battery is recyclable. If the product is damaged and cannot be used any longer, take it to an official collection point
for electronic products' waste, batteries, chargers. DO NOT throw the product away with the household waste. Follow
your country's rules for the separate collection of electrical and electronic products and rechargeable batteries. Dispose
of waste of this type only at the designated places. This will be important and significant contribution for the
environmental protection and the reduction of the harmful effects of the substances contained in batteries and electronic
components on the environment and human health.
Charging the parent unit (the receiver)
Power supply of the camera (baby unit)
Frequency
Transmit power
Operating time
Size of the LCD screen of the parent unit
Operating range (Line of sight)
Two – way communication option
Operating temperature
Battery Charging Temperature
Relative Humidity
➢ Figure PU.1:
1 – Charging LED/Power LED; 2 – Sound level indicator; 3 – Volume/Brightness; 4 – Exit /Two way talk; 5 – Zoom/Pan-Tilt;
6, 8, 9 and 11 – Buttons for adjusting the different menu functions or the movement of the camera to the left/ right/ up
and down; 7 – Confirm (OK) and Menu key; 10 – Microphone; 12 – LCD video display.
➢ Figure PU.2:
1 – Antenna; 2 – Power On/Off key; 3 – Stand; 4 – USB socket; 5 – Speaker; 6 – Reset key.
TECHNICAL SPECIFICATIONS
Built-in 3.7V 4000mAh (14.8Wh) rechargeable Li-ion battery
and
Charger: Input 100V ~ 240V – 50/60 Hz; Output 5V DC 1.2A
Adaptor (supply cord):
Input 100V ~ 240V – 50/60 Hz; Output 5V, DC 1.2A
2412 ~ 2472 MHz
≤19dBm
Up to 10 hours
5.5" 720P IPS TFT LCD
≥ 1000ft/300m (outdoor)
≥ 165ft/50m (indoor)
YES
0 ~ 40°C
10 ~ 40°C
15% - 85%
PARTS OF THE PARENT UNIT (Figure PU)
18
.
Werbung
