Caberg TANAMI Bedienungsanleitung Seite 8

ENG
1. HOW TO FIX AND REMOVE THE CLEAR VISOR
1.1 Loosen the screw B on both sides (Pic.1) and release the peak
1.2 Remove the washers and then release the visor (Pic. 2 & Pic.3)
1.3 To assemble back the visor, repeat the above process in inverse order.
2. PEAK ASSEMBLY/ DISASSEMBLY INSTRUCTION
2.1 Loosen the screw B (Pic.1) and A (Pic.4) on both sides and release the peak
2.2 To reassemble the peak, make sure that the washers are placed in
their seat and then tighten the screws A and B on both sides
3. HOW TO REMOVE THE SMOKE SUN SHIELD
3.1 Move the smoke sun shield lever C towards the back of the helmet. (Pic.5)
3.2 Release and remove the smoke sun shield by pulling gently outwards
on both sides (Pic.6)
4. HOW TO FIX THE SMOKE SUN SHIELD
4.1 Move the smoke sun shield lever C towards the back of the helmet. (Pic.5)
4.2 Insert and hook the sun shield to its seating by pressing gently on
both lateral sides (Pic.7)
WARNINGS! Do not use the sun shield during late night hours or in scarce
visibility condition.
WARNINGS! Any adjustments to the sun shield must be done in still position.
8