Removing The Adjustable Cover; Fitting The Adjustable Cover - Janser BEPo UFS 115 N Betriebsanleitung

11.4

Removing the adjustable cover

o Plug off the machine before starting to work on it.
o
Loosen the knurled nut
o Swivel motor completely to the right or to the left.
o Turn the sliding spindle
can be pulled off downwards.
o Place the extractor
knurled nut (Fig.
11.5

Fitting the adjustable cover

o
Plug off the machine before starting to work on it.
o Loosen the knurled nut
o Swivel motor completely to the right or to the left.
o Fit the machine from the top into the two-sided guides of the adjustable cover
and by turning the sliding spindle
o Place the extractor
knurled nut (Fig.
34
(Fig. 1/8) and remove the extractor
(Fig. 3/16) anti-clockwise, until the adjustable cover
(Fig. 1/7) onto the grub screw and into the extractor fit. Fix it with the
1/8).
(Fig. 1/8) and remove the extractor
(Fig.
(Fig. 1/7) onto the grub screw and into the extractor fit. Fix it with the
1/8).
(Fig.
(Fig.
3/16) turn it anticlockwise to the bottom.
1/7).
(Fig. 3/17)
1/7).
(Fig. 3/17)