Technical Data; Noise / Vibration - Janser BEPo UFS 115 N Betriebsanleitung

3

Technical data

Power input
Power output
Idle-running speed
Cutting wheel
Cutting depth
Cutting height / width of joint
Cutting height adjustment with adjustable cover
Min. distance to the lower bearing area
Rotatable
Spindle thread
Weight
Safety standard EN 50144
3.1

Noise / vibration

Typically, the A-rated noise levels of the machine are:
Sound pressure level
Sound power level
High noise level.
Possible damage of hearing.
Wear ear protection.
The typical rate of acceleration is 5.0 m/s
Values were measured according to EN 50 144
24
660 W
400 W
11,000 rev/min
max. ‡ 115 mm
0 - 28 mm
4 - 28 mm
precisely adjustable
1.5 mm
180°
M14
3.2 kg
Double insulated (safety standard II)
88 dB(A)
101 dB(A)
2
Attention