Troubleshooting - Aeg Fee63606Pm Benutzerinformation

3. Wash the spray arm under running water.
Use a thin pointed tool, e.g. a toothpick,
to remove particles of soil from the holes.
Run water through the holes to wash soil
particles away from the inside.
4. To install the spray arm back, press the
spray arm upwards and simultaneously
turn it counterclockwise until it locks into
place.
11.7 Cleaning the ceiling spray arm
The ceiling spray arm is placed on the ceiling
of the appliance. The spray arm (C) is
installed in the delivery tube (A) with the
mounting element (B).

12. TROUBLESHOOTING

WARNING!
Improper repair of the appliance may
pose a danger to the safety of the user.
Any repairs must be performed by
qualified personnel.
The majority of problems that may occur can
be solved without the need to contact an
Authorised Service Centre.
Problem and alarm code
You cannot activate the appliance.
1. Move the upper basket to the lowest level
2. To detach the spray arm (C) from the
3. Wash the spray arm under running water.
4. To install the spray arm (C) back, insert
Refer to the below table for information on
possible problems.
With some problems, the display shows an
alarm code.
Possible cause and solution
• Make sure that the mains plug is connected to the mains socket.
• Make sure that there is no damaged fuse in the fuse box.
to reach the spray arm more easily.
delivery tube (A), turn the mounting
element (B) counterclockwise and pull the
spray arm downwards.
Use a thin pointed tool, e.g. a toothpick,
to remove particles of soil from the holes.
Run the water through the holes to wash
soil particles away from the inside.
the mounting element (B) in the spray
arm and fix it in the delivery tube (A) by
turning it clockwise. Make sure that the
mounting element locks into place.
C
B
A
ENGLISH 19