Settings; Water Softener - Aeg Fee63606Pm Benutzerinformation

How to activate GlassCare
Press Option until the indicator
The display shows the updated programme
duration.
6.2 ExtraPower
This option improves the dishwashing results
of the selected programme. It increases the
wash temperature and duration.
How to activate ExtraPower
Press Option until the indicator

7. SETTINGS

7.1 Programme selection mode and
user mode
When the appliance is in programme
selection mode, you can set a programme
and enter user mode.
You can also view the number of completed
dishwashing cycles.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of the AirDry.
• Factory reset.
The saved settings remain valid until you
change them again.
How to set the programme selection
mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the programme
duration.
After activation, the appliance is in
programme selection mode by default. If not,
set the programme selection mode the
following way:
Press and hold simultaneously Delay and
Option until the appliance is in programme
selection mode.
10 ENGLISH
The display shows the updated programme
duration.
is on.
6.3 ExtraHygiene
This option provides better cleaning results
by keeping the temperature between 65 and
70 °C for at least 10 minutes during the last
rinsing phase.
How to activate ExtraHygiene
Press Option until the indicator
The display shows the updated programme
duration.
is on.
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter user mode, press and hold
simultaneously Delay and Option until the
indicators
flash and the display is blank.

7.2 Water softener

The water softener removes minerals from
the water supply, which would have a
negative effect on the washing results and on
the appliance.
The higher the content of these minerals, the
harder your water is. Water hardness is
measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in your
area. Your local water authority can advise
you on the hardness of the water in your
area.
Regardless of the type of detergent used, set
the right water softener level to ensure good
washing results and to keep the salt indicator
active.
Multi-tabs containing salt are not effective
enough to soften hard water.
is on.
, and