Appendix 1 Emc Information - Wellion Wave Design Bedienungsanleitung

• No maintenance or maintenance required when
operating the device.
• We suggest to calibrate the monitor once a year at least.
Please contact manufacturer or agent if you need.
Do not allow water or other liquids to ow into the
device. The arm pressure monitor should not no
longer be reused when liquid enter and damage the
devide and cu .

Appendix 1 EMC Information

Guidance and manufacturer's declaration – Electromagnetic emission
The upper arm blood pressure monitor is intended for use in the electromagnetic
environment speci ed below. The customer or the user of the upper arm blood
pressure monitor should assure that it is used in such an environment.
Emissions
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions
IEC61000-3-2
Voltage uctuations/- icker
emissions IEC61000-3-3
Electromagnetic environment
Compliance
– guidance
The upper arm blood pressure
monitor uses RF energy only for
its internal function. Therefore,
Group 1 its RF emissions are very low
and are not likely to cause
any interference in nearby
electronic equipment.
The upper arm blood pressure
monitor is suitable for use in
all establishments, including
domestic establishments and
Class B those directly connected to
the public low-voltage power
supply network that supplies
buildings used for domestic
purposes.
N.A.
N.A.
EN
33