Herunterladen Diese Seite drucken

Wellion Wave design Bedienungsanleitung Seite 22

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 38
Weight
Anti-electronic
Shock Type
Auto power-o
Anti-electronic
shock degree
Operation mode
Protection against
harmful ingress of
water or particular
matter
Service life
Cu service life
Protection against
electric shock
Operating
environment
Transportation
and storage
environment
22
About 221g (without batteries)
Internal power supply
1 minute without operation
Type BF
Continuous operation
IP21
5 years
10.000 measurements
Internally powered ME equipment (When using only
batteries)
Class II ME equipment (if equipped with AC adapter)
Temperature
condition
Humidity con-
dition
Atmospheric
condition
Avoid strong impact, direct impact, exposure or rain
during transportation. Store your monitor and other
components in a clean, safe location. Remove the arm
cu from the monitor. Gently fold the air tube into
the arm cu . The device shall be stored indoors at the
temperature of -20° C - 55° C and the relative humidity
of 10% - 93%.
Atmospheric condition: 70 - 106 kPa without corrosive
gas and with good ventilation.
5° C - 40° C
If stored or used be-
yond the designated
15% - 90% RF
temperature and
humidity range, it will
not be used properly
70 – 106 kPa
loading

Verwandte Produkte für Wellion Wave design