Wellion Wave design Bedienungsanleitung Seite 28

When can I obtain better measurements?
• Measurements are best taken in the mornings right after
you urinate or when your mind and body are stable. We
recommend taking readings at the same time of the day,
every time.
Why the blood pressure value measured each time is
di erent?
1. Every time during the systole, the blood pressure will
change to some extent. For example, a person with the
pulse of 70beats per minute will have 100.800 blood
pressure changes every day. Because the blood pressure
is constantly changing, it is di cult to obtain the correct
blood pressure value by measurement only once. Please
make measurement for 2 - 3 times. The rst measurement
will generally be higher due to nervousness or inadequate
preparation, and at the the second measurement, the
nervous emotion will be slightly alleviated, so generally,
the second measurement will be 5mmHg - 10mmHg
(0.7kPa - 1.3kPa) lower than the rst time. This will be
more obvious for those with higher blood pressure.
• When performing continuous measurement, please
note that: There might be extravasated blood because
the arm is compressed, resulting that the ngertip
blood does not ow smoothly. lf you continue the
measurement in case of extravasated blood, you
cannot obtain the correct measured value. Loosen the
arm band, raise your hand over the head and grasp and
stretch your left and right palms for 15 times repeatedly.
Then the extravasated blood can be dissolved and you
can continue the blood pressure measurement.
28