Merach MR-S26 Bedienungsanleitung Seite 18

Step 9: Install Batteries
Remove the back cover by hand (Figure A), then prepare the batteries (Figure B) and
install 2PCS AA Battery (98) (Figure C). And install the back cover to complete the
battery installation (Figure D).
Figure A
Step 10: Install the Monitor Decoration Cover
Plug the wire from the backward of the Monitor Decoration Cover (98) and the Sensor
Middle Wire (95) coming out of the Handlebar (5). Then snap the Monitor Decoration
Cover (98) onto the Handlebar (5).
Installation is complete. Check all mounting screws and make sure they are tightened.
Assembly Instructions
Figure B
015
Figure C Figure D
EN