IKA RH basic 2 Betriebsanleitung Seite 6

Technische Daten
RH basic 2
Bemessungsspannung: VAC
oder VAC
oder VAC
Frequenz Hz
Motorleistungsaufnahme W
W
Motorleistungsabgabe
Drehzahlbereich rpm
Drehzahleinstellung -
Drehzahlanzeige -
Antrieb -
Max. Rührmenge (Wasser) ltr 10
- stainless steel 1.4301
Heizplatte Werkstoff
Heizplatten-Abmessung mm Ø 125
W 400 (230 VAC)
Heizleistung W 400 (115 VAC)
W 360 (100 VAC)
Temperaturbereich °C
Temperatureinstellung -
Temperaturanzeige -
Kontaktthermometeranschluß - -
°C -
Einstellbarer Sicherheitskreis
Festeingest. Sicherheitskreis °C 400
Zul. Umgebungstemperatur °C
Zul. relative Feuchte %
Zul. Einschaltdauer %
Funkentstörung -
-
Schutzart nach DIN 60529
Verschmutzungsgrad -
Überspannungskategorie -
Schutzklasse -
Sicherung A
Geräteeinsatz über NN m
Abmessungen mm
kg
Gewicht
Technische Änderungen vorbehalten!
10
RH basic KT/C RH digital KT/C
220 ... 240 ±10%
115 ±10%
100 ±10%
50/60
15
2
100 ... 2000, stufenlos einstellbar
Drehknopf frontseitig
Skala 0 ... 6 4 stellige LED-Anzeige (0 - 2000 rpm)
Spaltpolmotor
15
rostfreier Edelstahl 1.4301 m. Emailbeschichtung
130 x 130
500 (230 VAC)
500 (115 VAC)
450 (100 VAC)
RT ... 320
Drehknopf frontseitig
Skala 0 - 6 4 stellige LED-Anzeige (0 °C ... +320 °C)
DIN 12 878
100 ... 400
-
+ 5 ... + 40
80
100
nach VDE 0871
IP 21
2
II
1 (Schutzerde)
10AT Id-Nr. 2755400
max. 2000
168 x 220 x 105
2,4
Contents
EU Declaration of conformity
Safety instructions
Intended use
Unpacking
Commissioning
Starting
Function stirring
Function heating
Limiter of safety temperature
Adjusting the Safety Temperature limit "Safe Temp" (Vers. KT)
Error codes
Mounting - Support H 16 V
Maintenance and cleaning
Accessories
Warranty
Technical data
EU Declaration of conformity
We declare under our sole responsibility that this product corresponds to the
directives 2014/35/EU, 2006/42/EC, 2014/30/EU and 2011/65/EU and conforms
with the following standards or normative documents: EN 61010-1, EN 61010-2-
010, EN 61010-2-051, EN 61326-1, EN 60529 and EN ISO 12100.
A copy of the complete EU Declaration of Conformity or further declarations of
conformity can be requested at sales@ika.com.
EN Safety instructions
Do not use the device in explosive atmospheres, it is not EX-protected.
Page
With substances capable of forming an explosive mixture, appropriate
11
safety measures must be applied, e.g. working under a fume hood.
11
To avoid body injury and property damage, observe the relevant
12
safety and accident prevention measures when processing hazardous
12
materials.
13
13
› Set up the device in a spacious area on an even, stable, clean, non-slip, dry
13
and fireproof surface.
14
15
Attention – Magnetism! Effects of the magnetic field have to be taken
15
into account (e.g. data storage media, cardiac pacemakers ...).
16
16
› Ensure that the power cord set / temperature sensor cable does not touch the
17
heating plate. The power cable must be replaced by a cable of equal quality
17
and capacity.
17
› Version RH basic KT/C and RH digital KT/C: Examine regularly (we recommend
18
every 4 weeks) the function of the safety temperature limiter. For this the
safety temperature must be changed around at least 1/4 revolution of the
value already stopped and be accomplished the attitude as under "adjusting
the safety temperature delimitation SAFE temp" described. By the exceeding
of the adjusted safety temperature (e.g. rotary button "temp" posed on right
end stop) you can examine the function. The "temp" pilot lamp must expire
and the heating must be lasting switched off.
› When using PTFE-coated magnetic bars, the following has to be noted:
Chemical reactions of PTFE occur in contact with molten or solute alkali metals
and alkaline earth metals, as well as with fine powders of metals in groups 2
and 3 of the periodic system at temperatures above 300 °C – 400 °C. Only
elementary fluorine, chlorotrifluoride and alkali metals attack it; halogenated
hydrocarbons have a reversible swelling effect.
(Source: Römpps Chemie-Lexikon and "Ulmann", Volume 19)
11