Batavus ION PMU4 Bedienungsanleitung Seite 66

Message
E19
E20
E21
E22
E23
E30
E32
E34
66
Diagnosis
Battery pack outside
the temperature range
Service needed
Motor current regulator
Problems while
charging
Serial number motor
incorrect
No communication with
torque sensor
Battery electronics are
too warm.
Control unit does not
support accessories
66
Solution
Wait until the battery
pack is within the
temperature range.
The charging will then
automatically continue.
Contact your dealer
for the planned
maintenance service.
The assistance is
adjusted by heavy use.
Turn the lights on/
off and wait for 10
seconds.
Reconnect the battery
charger.
Go to the dealer if the
message reappears.
This battery pack has
not been installed on
the bicycle. If this is
not the case, please
contact your dealer.
Turn on the pedal
assistance and check
if the battery pack is
placed correctly.
Let the battery pack
cool down and switch
on the pedal assistance
again.
Please contact your
dealer.