Lighting - Batavus ION PMU4 Bedienungsanleitung

- Hold the pressed for 3 seconds.
- Use the and
menu.
- Use the to go right.
- Use the ( and)
- Again press the
- Select the required option using
.
- Again press the
option.
- Press the several times to return to the basic display.
3.8.6

Lighting

You can set whether you always want
the lights to be on or that they go on
automatically under Lights.
If you select Always on, the bike's lights
will always be on.
If you select Automatic, the bike's lights
will be switched on and off automatically.
The light sensor continuously measures
the quantity of light and will switch the
lights on and off based on this information.
The lights (both at the front and rear) are supplied with power from the
battery pack and will, therefore, only work when the battery pack has been
installed in the E-bike. The motor will work as a dynamo when the battery
pack is fully discharged. The rear light is fixed to the battery pack.
If you need to replace the rear light, we recommend contacting your certified
E-bike dealer.
- Hold the pressed for 3 seconds.
- Use the and
- Use the to go right.
- Use the ( and)
- Again press the
- Select the required option using
- Again press the
- Press the several times to return to the basic display.
56
to go to the Functions
to go to Sound.
.
and
to set the required
to go to the Functions menu.
to go to Lights.
.
and
to set the required option.
56
FUNCTIONS
Trip counter
Sound
Lighting
Automatic charging
FUNCTIONS
Trip counter
Sound
Lighting
Automatic charging
.