Automatic Charging - Batavus ION PMU4 Bedienungsanleitung

3.8.7

Automatic charging

The "Automatic charging" function will only work in relation to E-bikes with a
rear wheel motor.
The E-bike will automatically generate energy when pressure is not applied
to the pedals. This makes sure that the battery pack can be charged while
cycling.
To use this function, you must first switch it on in the menu.
The automatic charging function works up to approximately 80% of the
battery charge depending on the
temperature.
Switching on automatic charging
The selected many setting will be active immediately and will continue to
apply until it is again adjusted on the display menu.
If the automatic charging function has been activated and no pressure is
applied to the pedals, the battery pack will be charged automatically. You
will feel a slight resistance on the motor while charging and the "Charging"
text will be displayed on the display.
- Hold the pressed for 3 seconds.
- Use the and
menu.
- Use the to go right.
- Use the ( and)
charging.
- Again press the
- Select the required option using
.
- Again press the
option.
- Press the several times to return to
the basic display.
57
to go to the Functions
to go to Automatic
.
and
to set the required
57
FUNCTIONS
Trip counter
Sound
Lighting
Automatic charging