Inferum ROFES E01C Betriebsanleitung Seite 84

8.4.6. After 4-5 fl ashing LED signals click «Start» button on the device for 0.5-1 seconds,
or «START» button in the panel of the mobile application. Do not move during the whole
EN
testing procedure, don't remove your hand with the unit attached and remain still fi xed
as long as the mobile device display lights up the message informing about the successful
completion of testing.
WARNING!
In case of non-specifi ed action on these items, the test results will be invalid!
WARNING!
If the test was carried out improperly, the information about the incorrect test procedure
will appear on the display of your mobile communication device. Wait for 15 seconds
and repeat the test on the scheme above (considering all the necessary actions to get
prepared for the test), but perform it not more than three times. In case of three unsuc-
cessful y made attempts, repeat the testing in 20 minutes. If thereafter you still receive
the message mentioned above, contact the technical support service, please.
88