Tunturi HG60 Montageanleitung Seite 22

English
Use the equipment only for its intended
use as described in this manual. DO NOT
use attachments not recommended by the
manufacturer.
- Do not place any sharp object around the
equipment.
- Disabled person should not use the equipment.
- Before using the equipment to exercise, always
do stretching exercises to properly warm up.
- Never operate the equipment if the equipment
is not functioning properly.
- A spotter is recommended during exercise.
- This equipment is designed and intended
for home and consumer use only, not for
commercial use.
Additional safety instructions
- During exercising hands must be kept clear
from the guiding bars of the weights.
- Never re-set weights during exercising.
- Avoid the cord grating along sharp parts.
- When selecting a weight, always push the pin in
to its full extent.
- Children should only use this equipment under
the direct supervision of a knowledgeable adult.
At no times should children be left unattended
near the machine.
- Prior to carrying out any exercise ensure that
the body is in the correct position to avoid
injury.
⚠
WARNING
• When using the latissimus grip, first the
load must be selected, before the grip is
mounted.
• If you change the weight in the meantime
you have to hold the upper weight to prevent
the grip falling down.
Warning:
Before beginning any exercise program, consult
your physician. This is especially important for
individuals over the age of 35 or persons with
pre-existing health problems.
Read all instructions before using any fitness
equipment.
Tunturi New fitness bv. assumes no responsibility
for personal injury or property damage sustained
by or through the use of this product.
Save these instructions!
22
Important assembly information
Before you start
We recommend to use two adjustable wrenches
to assemble your product. If you have metric sized
wrenches in correct size this is fine too.
‼
NOTE
• Suitable (adjustable) wrenches are "NOT"
provided with the product, neither included
in the assembly kit.
• It is strongly recommended that this
equipment is assembled by two or more
people to avoid possible injury.
Description illustration A
The illustration shows what the trainer will looks
like after the assembly is completed.
You can use this as a reference during your
assembly, but do follow the assembly steps
always in the correct sequence as showed in the
illustrations.
Description illustration B
The illustration shows what components and parts
you should find when un-boxing your product.
‼
NOTE
• Small parts can be hidden/ packed in hollow
spaces in the Styrofoam product protection
• If a part is missing, contact your dealer.
Description illustration C
The illustration shows the hardware kit that comes
with your product.
The hardware kit contains bolts, washers, screws
, nuts etc. and the required tools to properly fit
your trainer.