Miele WTS 610 Montageanweisung Seite 43

Connecting the washing machine to
the plinth

Damage to washing machine and
floor.
The washing machine and the floor
may be damaged if the instructions
for preparing the washing machine
are not observed.
Observe the instructions for prepar-
ing the washing machine.
Laying the washing machine on its side
This step must be carried out by 2
people.
 Prepare a soft, flat surface (e.g. a
blanket).
 Slowly lay the washing machine on its
side.
Removing the feet from the washing
machine
 Using an open spanner, turn the
counter nut in a clockwise direction.
 Unscrew the foot all the way and re-
move it.
 Repeat the process for all 4 feet.
Screwing the plinth to the washing ma-
chine
 Place the spacer sleeves on the set
screws.
 Push the plinth and the washing ma-
chine together. The set screws must
be inserted in the holes of the feet
that have been removed from the
washing machine.
 Using an open spanner, tighten all 4
threaded bolts alternately and evenly
inside the plinth.
en - WTS 610
43