1Control LINK Kurzanleitung Seite 35

generation security algorithms based on public keys and symmetric end-to-end encryption with ephemeral keys.
Communication between 1Control LINK and a smartphone uses security algorithms for a secure and encrypted
Internet connection.
Power supply
1Control LINK is powered by a 5V USB power supply (already included in the package).
Data and limitations
LINK can control 5 SOLO or DORY devices and can be used by multiple people / smartphones.
App
The "1Control" App is free and can be downloaded from the Stores for iPhone and Android.
It is compatible with the following systems:
- Smartphone iPhone 4S or later with iOS 9 or later
- Smartphone Android with 4.3 system or later and Bluetooth LE 4
"1Control" app is able to manage many 1Control devices at the same time.
First installation
1. Check that you have already downloaded the "1Control" app and that you have configured a SOLO or DORY
device
2. Connect the antenna and the supplied power cable to 1Control LINK
3. Place 1Control LINK in a place where there is Wi-Fi network coverage and at a distance of less than 20-30
meters from the 1Control SOLO or 1Control DORY device you want to control
4. Connect with the "1Control" app to 1Control LINK and set a secret PIN code
5. Connect the 1Control LINK device to the desired Wi-Fi network or via network cable
6. Pair a 1Control SOLO or 1Control DORY device to 1Control LINK
Shares
Device administrators can share an access with 1Control LINK through the "1Control" app.
All users who wish to receive a share must register via the app by entering their phone number. NB: it is not
possible to use the same phone number to register from different smartphones.
The administrator can share an access to a user by indicating his phone number. It is possible to set time
constraints (start and end date, days of the week, hours of the day) to shares.
To share an access it is not necessary to be near the device, this operation can also be performed remotely.
Factory reset
You can completely delete all data stored on the LINK by restoring it to factory conditions. To reset, press and
hold the reset button on the device for more than 10 seconds. Restoring the device causes the loss of all saved
data.
After sales service
In case of problems contact us from the website www.1control.eu/contact-us
Package contents
1 LINK device
1 Bluetooth 4 LE / Wi-Fi antenna
1 5V USB power supply
1 USB / micro-USB power cable
Radio frequencies
Bluetooth: Freq. 2402~2480 MHz, Max. power 4.54 dBm
WLAN: Freq. 2412~2472MHz - 2422~2462MHz, Max. power 13.63 dBm
33