VEVOR ROPE-D-102-131 Benutzerhandbuch Seite 5

Standards. (These include the harness, karabiners, tape, slings, anchors,
belaying devices, and descenders)
In case of use with a mechanical device, ensure that the diameter of the
rope and its other characteristics are compatible with the device.
Note: When a rope is new, the braking effectiveness of belay devices may
be significantly reduced.
Do not use a karabiner for tying-in if there is the risk of a fall.
When using products that come into contact with the rope, ensure they are
intended for this purpose and comply with applicable technical standards.
Special attention should be paid to the selection of belaying elements
which have to take account of the rope diameter.
When combining this rope with other components, the safety aspects of
the products may interfere with each other. This equipment should only be
used in connection with parts of personal protective equipment (PPE)
bearing the CE symbol to secure individuals against falls from heights. If
the rope is used with other PPE systems (e.g. a seiling equipment (EN
341), fall arrest systems (EN 363), adjustment equipment (EN 358, EN
353-2) etc.), it must be ensured that these systems are compatible with the
rope. Follow instructions for proper use, especially regarding equipment
markings indicating rope type and diameter.
●How to use this single rope?
1）Uncoiling for the first time
During the initial use, spread open the rope cord and insert both lower
arms through the rope coils in opposite directions.
4