HP DesignJet Z2600 PostScript Einführende Informationen Seite 5

Front-panel error messages
If you see an error message that does not appear here, and you feel in doubt about the correct response, or if the
recommended action does not seem to solve the problem, contact your support representative.
Message or code
[Color] cartridge has altered
[Color] cartridge has expired
[Color] cartridge is low on ink
[Color] cartridge is missing
[Color] cartridge is out of ink
[Color] cartridge is very low on
ink
[Color] printhead is missing
Cutter replacement advised
Job queue notifi cation
Maintenance #1 advised
Maintenance #2 advised
Paper loaded incorrectly: remove
paper
Paper mispositioned: remove
paper
Paper path error: incorrectly
loaded
Paper path error: misaligned
Printhead replacement
incomplete. Restart it.
Printheads need individual
testing. Do replacement.
Remove [color] printhead
Replace [color] cartridge
Replace [color] printhead
Reseat [color] cartridge
Reseat [color] printhead
01.0, 01.1, 01.2
08:04
08:08
21, 21.1, 22.0, 22.1, 22.2, 22.3,
24
4 Introductory Information
Recommendation
Check the cartridge.
Replace the cartridge.
Ensure that you have a new cartridge of the same color ready.
Insert a cartridge of the correct color.
Replace the cartridge.
Ensure that you have a new cartridge of the same color ready.
Insert the correct printhead.
Contact your support representative to replace the cutter.
Cancel, resume, or delete the job.
Contact your support representative.
Contact your support representative.
Remove the paper and try to reload it.
Remove the paper and try to reload it.
Remove the paper and try to reload it.
Remove the paper and try to reload it.
Restart the printhead replacement process.
Test the printheads using the Image Diagnostics Print, and replace any that are not
working correctly.
Remove the incorrect printhead and insert a new printhead of the correct type
(color and number).
Remove the cartridge and insert a new cartridge of the correct type (color and
number).
Remove the printhead and insert a new printhead of the correct type (color and
number).
Remove and reinsert the same cartridge.
Remove and reinsert the same printhead, or try cleaning the electrical
connections. If necessary, insert a new printhead.
Restart the printer.
Restart the printer. If the problem persists, update the printer's fi rmware.
Retry the operation that you were attempting. If it fails again, restart the printer. If
the problem persists, update the printer's fi rmware.
Restart the printer.