Herunterladen Diese Seite drucken

Peg Perego stand by me Gebrauchsanleitung Seite 12

is compatible with the
following original Peg Perego
products: Culla Flex, Culla
Belvedere , Ypsi Bassinet.
• WARNING: Do not use if
any part of the stand is
broken, torn or missing.
• WARNING: only use on a
firm, horizontal level and
dry surface.
• WARNING: Do not let other
children play unattended
near the carry cot and stand.
• WARNING: Before placing
the baby inside the bassinet,
adjust both of the stand's
sliding supports to the
desired height and make sure
that the bassinet does not tilt
to one side.
• WARNING: Ensure the
pram body attachments are
aligned, in both sides, with
the stand's attachments.
• WARNING FALL HAZARD -
Before placing the child in
the product always check
that it's properly latched
to Stand by me by pulling
upwards the product once
the operation is performed.
• STAND BY ME: When the
product is not used, it has to
be stored in any case out of
reach of children.
RECLINED CRADLE MODE
• When used as a recliner,
this product is designed for
children from birth up to a
weight of 9 kg.
• This product is compatible
with the following original
Peg Perego products: All Peg
Perego infant carriers (Primo
Viaggio).
• Do not use the reclined
cradle once your child can sit
unaided.
• This reclined cradle is not
intended for prolonged
periods of sleeping.
• Stop using the product when
the child starts trying to sit
up.
• Never use the toy bar to carry
the product (if applicable).
• Do not move or lift this product
with the baby inside it.
• It is dangerous to use
the reclined cradle on an
elevated surface, e.g. a table.
• Never allow a child to sleep
in this product. This product
is not a replacement for a cot
or bassinet.
• Should your child fall asleep,
move them to a suitable cot
or bassinet.
• Danger of strangulation:
12
loading