HP SD Pro 44-Zoll-Scanner Einführende Informationen Seite 4

The Quit button shuts down the touch screen.
The Online Help button provides information on the use of the scanner.
The File Manager button opens the File Management dialog box.
The Print Queue button accesses the print queue.
The Preview button scans the document to preview the image and select an area of interest.
The Reset button resets settings to default values.
The Stop button cancels the current scanner activity.
The Add page button groups copies into sets (multipage job).
The Finish button (in the Copy tab) closes the multipage job and starts printing.
The Copy button (in the Copy tab) starts copying. In the Scan tab, the Copy button starts scanning.
The Save button (in the Scan tab) saves scanned pdf files.
The Print button (seen in the Print tab) starts printing.
Create a media profile
To create a media profile your printer must be connected to a network.
You can create a media profile only for a paper type that is currently loaded in the printer installed through the network.
The media profile list includes the paper types with existing media profiles and also the paper types currently loaded in
the printer (the latter shown with an asterisk). You can select one of the paper types loaded in the printer and create a
media profile as described below if it is not already created. You cannot change the names of the media profiles.
In order to print, you must first create a media profile, and you must have at least one printer connected to the scanner
over a network.
1. Check that the media profile you intend to create does not already exist in the media profile list. If the media profile
you want to create already exists, you must delete the existing one first before you can install it again.
2. Clean and calibrate the scanner, unless that has already been done recently. See "Scanner calibration" on page 8.
3. Start media profile creation by selecting the
4. Press the Media Profile
5. If you see a Calibrate RIP
6. Select the paper type that you have loaded in the printer.
7. When you are warned that no media profile exists for that paper type, press OK.
8. Press the Print Color Sheet
which you can discard, before printing the color sheet.
Introductory Information
Setup
button, and then press the
button and would like to use it, refer to the online help.
button to print a color patch reference sheet. Some printers print a special test sheet,
tab.
Tool button. (Alternatively: Printer > Tool > Media Profile).