Beko RHP 6320 B Bedienungsanleitung Seite 11

5 Troubleshooting
Operation of your appliance can lead to errors and malfunctions. The following ta-
bles contain possible causes and notes for resolving an error message or malfunc-
tion. It is recommended to read the table below carefully in order to save your time
and money that may cost for calling to the service center.
Problem
After the power is
engaged, the machine
does not work.
The machine suddenly
stops during heating.
PTC Fan Heater / User Manual
Cause
The plug may not be
plugged well.
The temperature ex-
ceeds the threshold of
the thermal cut- off.
Solution
Check whether the plug is
properly inserted into the
receptacle.
Pull off the plug manually
and then insert it into the
receptacle again when the
machine is cooled.
11 / EN