Software Installation - Medion Life P42001 Bedienungsanleitung

Software Installation

Installing the Software/Hardware Driver
1. Insert the software CD into the CD-ROM drive. The CD should auto run and the
installer menu will appear (see below). If the CD does not auto run; go to: Start
and type in "D:\setup.exe" where D:\ is the CD-ROM drive.
2. Two installation options: Automatic Installation and Custom Installation. Automatic
Installation is recommended. Follow the on-screen instructions to install the driver
and software.
3. Reboot your computer before connecting your camera.
Downloading & Transferring Files to your Computer
1. Plug the small end of the USB cable into the USB/AV port of your camera. Plug the
other end of the USB cable into the USB port of your computer.
2. Make sure the battery is inserted correctly and press the Power button.
3. Go to "My Computer" and open "Removable Disk (D:\)" or the next available alphabet
for the removable disk. (This camera uses mass storage so the computer will detect a
hardware device.) You will see a folder labeled "DCIM" (for external SD memory and
internal camera memory) inside this drive. Click to open this folder, and then click
again to open the next folder "nnnA1030" (nnn = 100~999). Your video, audio and
image files are stored under this folder.
NOTE:
If you're using Windows XP, the Windows Wizard will open and you
can select the operations offered by Windows to download, view, or
play your digital files (as shown).
EN
Run,
005