Cleaning & Maintenance - Renpho R-G010V Bedienungsanleitung

Note:
� After power on, tension relief mode, soft pressure, high heat, 15-min timer,
voice mode, included music volume level 0, and Bluetooth will be enabled
by default.
� In silent mode, the voice control function still works, but the voice
broadcast and included music will be disabled. The music playing from your
mobile device will be paused but can be resumed through your mobile
device.
� Memory function: The device automatically recalls the last set massage
mode, pressure level, duration, and heat level once turned on again. But if
the pressure, heating and vibration functions are turned off and the device
is left idle, it will automatically shut off after 10 seconds and the memory
function will not work.
� Auto-off timer: Once the timer is set, the device will operate for the
selected duration and then automatically shut off.
CONNECTING TO BLUETOOTH
1. Turn on the device and enable Bluetooth on your mobile device.
2. Search for "
play your music playlist through the device.
Note:
Once paired successfully, the device will be automatically connected
to Bluetooth each time turned on, followed by a voice prompt
"Bluetooth connected". Your music will play through the device at a
default volume level of 5 every time Bluetooth is connected.
CLEANING & MAINTENANCE
1. Cleaning:
a. Turn off the device and allow it to cool down before cleaning or
storing.
b. Wipe the device surface and gel mask with a soft cotton cloth
slightly dampened with mild detergent. Do not submerge them in
water or use bleach or corrosive cleaners.
2. Storage & Maintenance:
a. Ensure both the device and gel mask are clean and dry before
storing.
" via your Bluetooth settings and connect it to
EN - 09