Werbung
3)
To rotate it back to the forward facing position: pull the rotation button (13) outwards to
release the child car seat (12), and then rotate the child car seat (12) back to the
forward facing position, at where the child car seat will lock into place automatically.
Ensure the child car seat is at the forward facing position,
4)
and the desired rec ine position Then tighten the free end
of Top Tether adjuster B (47) until theindicator
2.5.4 Without Top Tether (Apramo@ Dual Tether@)(Group 11/111)
Pull the rotation button (13) outwards to release the child
car seat (1 2), and then rotate the child car seat (12) by
900 or 1800, both left and right, at where the child car
seat wil lock into place
automatically
CAUTION! The Top Tether (Apramo@ Dual Tethero
is secured
ONLY when
the indicator
is completely
green.
CAUTION! The child restraint system can ONLY be
used in forward or rearward
facing position when
travelling.
Always ensure that the rotating part of
the child restraint is fully engaged
by trying to turn
the child car seat (12) around in both directions.
3. Installation
3.1 Rearward
Facing
Installation
3.1.1 Group 0+11 (O - 18 KG, birth to approx. 4 years) With 5-point harness + ISOFIX + Top
Tether (Apramo@ Dual Tether")
Prepare the ISOFIX
(Refer to section
2.1)
1)
2)
Ensure that the 5-point
harness is correctly
3)
Ensure that the 5-point
harness is correctly
shows green
22
12
13
installed
(Refer to section
5)
adjusted
(Refer to section
2.3.1)
4)
Adjust the child car seat to the fullest rec ine position
to section
securely
ocked
o
5)
Rotate the child car seat (If necessary
the rear of the vehicle against the direction of travel.
Ensure that the child
position and the rotation mechanism
6)
Double
check
fullest reclined position
7)
Install
the
ISOFIX
8)
Push the child seat towards the backrest applying a firm,
CLICK
16
even pressure on both sides.
Install the Top Tether
9)
15
CAUTION! The ISOFIX connectors
when both indicators
05
CAUTION! The Top Tether (Apramo@ Dual Tethero is
secured ONLY when the indicator
3.1.2 Securing your child with 5-point harness
Press the red button (19) to release the 5-point harness
25
buckle and press on the central adjuster (04) to pull out
the shoulder
rzc
pads (06)
2)
Place your chi d in the child car seat, and ensure that
your childs back is ying flat against the backrest of the child
car seat
Guide the two buckle latches
3)
them into the 5 point harness buckle (19). An audible
19
"click"
will be
2.4.1)
and
make
sure
recline
mechanism
is
refer to section 2 5), to
car seat is in the rearward
facing
is securely locked
to
make
sure
that
the
child
car
seat
is in the
(Refer to section 2.1)
(Refer to section 2.2. I)
(15) are secured ONLY
(16) are completely
green.
is completely
green.
belts (05) DO NOT pull on the shoulder
(20) together
and insert
heard
once
the
buckle
is locked
GB
15
Werbung
