Werbung
30
Red belt guide
20 Buckle
latches
Webbing
40
09 Release
handle
35 Headrest
lever
1.5 3-point
vehicle
belt
24
Vehicle
seat
buckle
GB
08
19
Red button
Metal plate
11
Release
34 Shoulder pads
01
ISOFIX anchor
32 Joint plate
33 Clip
02 Guide
10
Diagonal belt section
26
Lap belt section
01
02
16
47
socket
18
2. Preparatory
Work and
Functions
2.1 Prepare
ISOFIX
If your car is not equipped
please insert the guide socket (02) into the ISOFIXanchor
(01).O
TIP: ISOFIX
anchors
are
located
and
seat
cushion.
2)
Press the ISOFIX button (03), push rearward to the longest
03
position, then insert the ISOF X connectors
guide socket (02) one by the other, an audible "click' wi
be heard, with the ISOFIXindicator (16) turns to green
CAUTION! The ISOFIX connectors
when both indicators
(16) are completely
05
2.2 Prepare Top Tether (Apramo@ Dual Tether@)
2.2.1 Group 0+/1, Rearward Facing
Make
sure the
child
car seat
1)
rearward facing and in fullest recline position
06
Press the release button of the Top Tether adjuster B (47)
2)
to release the Top Tether strap (48) to the maximum
desired length
3)
Thread the Top Tether strap (48) through one of the belt
guides (17) with the one at the inner side of the vehicle
seat.
4)
Hold the Top Tether adjuster
the other hand pull the strap with the snap hook (18), to
18
the maximum or desired length
Hook the snap hook (18) onto the Top Tether anchorage
5)
point recommended
in your vehicle handbook
this sign
in your vehicle or check with your vehicle
dea
er.
with the ISOF X guide socket,
between
the
backrest
(15) into the
(15) are secured
ONLY
green.
is installed
with
ISOF X,
or
A (46) horizontally,
and
use
Look for
GB
09
Werbung
