Commend SIS-DONGLE Bedienungsanleitung

SIS-DONGLE
Intercom module for use as key subscriber for VirtuoSIS.
Connection diagram
RJ45 jack
(Ethernet/PoE)
JP1
Configuration
• Only the RJ45 jack can be used. All other connectors are without function.
• For configuring the SIS-DONGLE, the software IP Station Config is required.
Safety warnings
• This device shall be installed or replaced by trained and qualified personnel only.
• Only use recommended tools when installing the device.
• Do not place the device in areas where it may become wet or damp, and avoid dusty, humid and
high temperature environments.
• Use shielded Ethernet cables only.
• Do not make any modifications to the device.
Handling
Use the original packaging when transporting the device to prevent damage.
Observe the precautions for handling of electrostatic sensitive devices.
Disposal and recycling
Equipment with this symbol shall not be disposed of together with household or commercial
waste.
The directive 2012/19/EU on waste electrical and electronical equipment (WEEE) is applicable
in the European Union member states.
Manufacturer's reference
This device complies with the European directives listed below by fulfilling corresponding
standards:
• Electromagnetic compatibility (directive 2014/30/EU)
• The restriction of the use of certain hazardous substances in electrical and electronic
equipment (directive 2011/65/EU)
For the latest software and documentation, visit: www.commend.com
Keep this description in safe custody.
Type: D-BZ-SISDONGLE, Version: 1.0/0717 Commend International GmbH, Saalachstraße 51, A-5020 Salzburg – www.commend.com
Dimensions
Measuring units in mm (in), not to scale!
109 (4.29)
100 (3.94)
87 .5 (3.45)
SIS-DONGLE
Intercom module for use as key subscriber for VirtuoSIS.
Connection diagram
RJ45 jack
(Ethernet/PoE)
JP1
Configuration
• Only the RJ45 jack can be used. All other connectors are without function.
• For configuring the SIS-DONGLE, the software IP Station Config is required.
Safety warnings
• This device shall be installed or replaced by trained and qualified personnel only.
• Only use recommended tools when installing the device.
• Do not place the device in areas where it may become wet or damp, and avoid dusty, humid and
high temperature environments.
• Use shielded Ethernet cables only.
• Do not make any modifications to the device.
Handling
Use the original packaging when transporting the device to prevent damage.
Observe the precautions for handling of electrostatic sensitive devices.
Disposal and recycling
Equipment with this symbol shall not be disposed of together with household or commercial
waste.
The directive 2012/19/EU on waste electrical and electronical equipment (WEEE) is applicable
in the European Union member states.
Manufacturer's reference
This device complies with the European directives listed below by fulfilling corresponding
standards:
• Electromagnetic compatibility (directive 2014/30/EU)
• The restriction of the use of certain hazardous substances in electrical and electronic
equipment (directive 2011/65/EU)
For the latest software and documentation, visit: www.commend.com
Keep this description in safe custody.
Type: D-BZ-SISDONGLE, Version: 1.0/0717 Commend International GmbH, Saalachstraße 51, A-5020 Salzburg – www.commend.com
Dimensions
Measuring units in mm (in), not to scale!
109 (4.29)
100 (3.94)
87 .5 (3.45)