Taurus MODEL AIR Gebrauchsanleitung Seite 10

• Some parts of the appliance have been
lightly greased. Consequently, the first
time the appliance is used a light smoke
may be detected. After a short time, this
smoke will disappear.
USE
• Extend the supply cord completely
before plugging it in.
• Connect the appliance to the mains.
• Fit the accessory corresponding to the
desired use or hair style.
• Turn the appliance on, by using the
setting selector (B).
• Select the desired speed and
temperature setting.
- : maximum speed and tepid air.
- II: maximum speed and warm air
- I: minimum speed and warm air.
• Guide the appliance to direct the flow of
air in the desired direction.
ACCESSORIES (FIG. 1)
• To attach the accessory, press the
accessory release button (D) while
pressing down on the accessory,
aligning the empty arrow on the
accessory with the arrow on the
appliance. Release the button and turn
it slightly until the two full arrows line up
and you hear a click.
• To remove the accessory, press the
accessory release button (D), turn
slightly and pull.
CONCENTRATOR (G)
• To dry the hair before styling it.
Concentrates the air flow into a specific
zone.
• Move the appliance around in circles to
distribute the air along the hair.
COMBINED BRISTLES BRUSH (G)
• To create large curls and waves,
detangle and add volume.
• Take a strand of hair and wrap it around
the brush, gently rotating the appliance.
(Fig. 2)
• The closer to the root, the more volume
will be created.
RETRACTABLE BRISTLE BRUSH (H)
• To create and fix curls with a special
system. The curl is removed from the
accessory without losing the wave or
curl.
• To extract or retract the bristles, rotate
the tip of the brush (H1). (Fig. 3)
• Take a strand of hair and wrap it around
the brush, gently rotating the appliance.
(Fig. 2)
• Retract the bristles and easily release
the curl using the retraction function
(H1).
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
• Turn the appliance off by selecting
position 0 on the setting selector (B).