RUSTA Multistyler 6 in 1 HMS24 Gebrauchsanweisung Seite 7

GET STARTED!
1. Remove all packaging material from the main device and attachments.
2. Assemble your desired attachment to the air outlet.
3. Always ensure the switch is set to OFF position before plugging the unit
into the power outlet.
4. Use the high setting for drying hair and use low setting for styling.
If the unit stops working for any reason, turn it off at once and let it cool down.
USE
The multistyler can be used in 2 different modes.
STYLING WAND MODE
Attachments suitable for this mode:
• Straightener – straightens hair.
• Round brush – lift volume and shape.
• Volumizer – blow out volume and glamorous waves.
• Left & Right curlers – auto curlers.
HAIR DRYER MODE
Attachments suitable for this mode:
• Concentrator – precision styling and drying.
• Diffuser – ideal for drying wavy and curly hair.
Slide the lock button down and rotate the nozzle to the left
to switch to the hair dryer mode.
Slide the lock button down and rotate the nozzle to the right
to switch back to the styling wand mode.
HOW TO ATTACH THE ATTACHMENT(S)
1. Slide a suitable attachment onto the handle.
2. Twist the attachment to the left to fastened it.
To remove the attachment, twist the attachment to the right.
SWITCH SETTING
ON/OFF BUTTON
0 = OFF position
1 = Power on
SET MODE BUTTON
SET mode button switches the product modes.
Green light = Cold air and high speed.
Yellow light = Hot air and low speed.
Red light = Hot air and high speed.
7