UNIPRODO ACENDER 2.0 Bedienungsanleitung Seite 53

USB Input
The machine only supports custom designs in the input *.DST format
The user should ensure that the input pattern size does not exceed the machine's maximum sewing size
when entering a custom pattern.
Please use only letters of numbers for the name of custom pattern file.
EN
6
Once you have chosen or edited the patterns,
click the Confirm button (A) at the bottom right
of the screen to enter the embroidery flow
execution interface.
7 In the embroidery interface, after users have
confirmed that the upper thread, bobbin thread,
presser foot, and embroidery frame are correctly
installed, they can start the embroidery by
clicking the Start button (A) at the bottom right
of the screen or by pressing the start/stop
button on the machine cover.
When the machine is embroidering with
multiple colors, it will stop after each color to
wait for a thread change.
8 After embroidery, cut the upper and bottom
threads, lift the presser foot, and remove the
embroidery frame to complete the embroidery
operation.
1 Insert USB flash drive
with *.DST embroidery file
into the USB port of the
machine.