UNIPRODO ACENDER 2.0 Bedienungsanleitung Seite 33

by a person responsible for their safety or they have received instruction on how to operate the
machine.
d) When working with the device, use common sense and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e) To prevent the device from accidentally switching on, make sure the switch is on the OFF position before
connecting to a power source.
f) Do not overestimate your abilities. When using the device, keep your balance and remain stable at all
times. This will ensure better control over the device in unexpected situations.
g) Do not wear loose clothing or jewellery. Keep hair, clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in moving parts.
h) Remove all adjusting tools or spanners before turning the device on. A tool or spanner left in the
revolving part of the device may cause injury.
i) The device is not a toy. Children must be supervised to ensure that they do not play with the device.
j) Do not put your hands or other items inside the device while it is in use!
2.4. Safe device use
a) Do not use the device if the "ON/OFF" switch does not function properly (does not switch the device on
and off). Devices which cannot be switched on and off using the ON/OFF switch are hazardous, should
not be operated and must be repaired.
b) Make sure the plug is disconnected from the socket before attempting any adjustments, accessory
replacements or before putting the device aside. Such precautions will reduce the risk of accidentally
activating the device.
c) When not in use, store in a safe place, away from children and people not familiar with the device who
have not read the user manual. The device may pose a hazard in the hands of inexperienced users.
d) Keep the device in perfect technical condition. Before each use check for general damage, especially
check moving components for cracked parts or elements, and for any other conditions which may
impact the safe operation of the device. If damage is discovered, hand over the device for repair before
use.
e) Keep the device out of the reach of children.
f) Device repair or maintenance should be carried out by qualified persons, only using original spare parts.
This will ensure safe use.
g) To ensure the operational integrity of the device, do not remove factory-fitted guards and do not loosen
any screws.
h) Avoid situations where the device stops working during use due to excessive loading. This may result in
overheating of the drive elements and damage to the device.
i) Do not touch articulated parts or accessories unless the device has been disconnected from the power
source.
j) Do not move, adjust or rotate the device in the course of work.
k) Do not leave this appliance unattended while it is in use.
l) The device is not a toy. Cleaning and maintenance may not be carried out by children without
supervision by an adult person.
m) It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
n) Keep the device away from sources of fire and heat.
o) Do not overload the device.
p) Do not cover the ventilation openings!
q) Use the device on a hard, stable surface, protected from moisture, frost and direct sunlight.
ATTENTION! Despite the safe design of the device and its protective features, and despite the
use of additional elements protecting the operator, there is still a slight risk of accident or injury
when using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The product is a machine for sewing and embroidering logos, initials, personalised lettering or designs.
The product is intended for home use only.
The user is liable for any damage resulting from unintended use of the device.
EN