Setting Up Internet Control; Restoring The Factory Settings - eQ-3 MAX! Cube Bedienungsanleitung

If you want to be able to control your system using the In-
ternet control feature or via a smartphone, then Internet
access must also be enabled and Internet control must
be set up.
Please note that the MAX! cube can only be ac-
cessed with the MAX! Internet control feature if the
local MAX! software is inactive.
• Set up your user account for portal operation using the
local MAX! software.
• Therefore, click „Internet control" and follow the in-
structions.
You now have a flexible means of controlling and configu-
ring your MAX! system and can access it from home as
well as via the Internet.

7. Restoring the factory settings

The MAX! cube can be reset to
the initial state manually.
When the factory settings
are restored, all informati-
on about taught-in devices
and all settings made are
lost and cannot be retrieved.
• Disconnect the MAX! cube from
the power supply and wait for 1 minute.
• Press and hold down the reset button and at the same
22

6.4 Setting up Internet control