Werbung
3. Fix the supporting leg with screws, then install the screw caps.
4.
Fix the top baffle to the top of the cabinet inner with screws, then install the
screw caps
.
Screw
5. Open the door of cabinet the maximum angle, and open the door of the
refrigerator to the corresponding position. Sliding the block to make sure
inner edge align with the door edge of refrigerator, then fix the blocks to the
door of cabinet with screw and install screw caps.
6. Take out the sealing strip from accessory bag, and press it in the gap between
the cabinet and the refrigerator. Installation is completed.
07
Screw
sealing strip
EN
Werbung
