CH-2: Video output terminal
(CH-1 trigger slope switch at
(+), Internal trigger at CH-1
side)
CH-1: 1V/div 50usec/div
CH-2: 2V/div 50usec/div
CH-2
VIDEO OUT
SWITCHING
|
PULSE
Figure 2-2.
VC-H88GM
TRACKING PRESET
Measuring
Monitor TV
instrument
Input signal
Commercial broadcast or video
signal
switch)
Specification
Minimized noise bar on
monitor screen
1. Have
the unit to receive
a Commercial
external video input terminal.
(AUX or AUX1 input selector switch)
mode.
3. Press the SLOW
button
on
the
remote
on the slow mode.
4. Press the TEST key on the Timer unit.
SP SLOW tracking control using the tracking
button (+) or (-—) on the remote controller so
6. Press the PB button.
7. Press the still/pause button and put the unit in
8. Look at the moniter screen so that the noise
disappears from the screen.
@ Self-recorded tape means
a cassette whose
program
was
recorded
by the unit being
(AUX or AUX1 input selector
Control
Tracking control button (+) or
(-)
broadcast signal or feed the video signal to the
2. Play back the self-recording tape PAL system SP
controller, and playback the recorded portion
5. Look at the monitor screen and adjust the PAL
that the noise disappears from the screen.
the still mode.
Notes:
adjusted.