be cool eSC-Hi2 Bedienungsanleitung Seite 30

7. ASSEMBLY
7.1 Assembling
1. fold out the stand of the scooter and
close the folding mechanism.
3. use the hexagon wrench in the package
to tighten the screws on both sides
7.2 Charging
1. open the rubber stopper
at the position shown
2. mount the handlebar on the handlebar
4. check the operating display after
assembly is complete
2. insert the charging
plug of the mains
adapter into the
charging socket
30
3. after successful
charging, close the
rubber plug to
secure the
charging socket
ENGLISH