Advanced Bionics Naida CI T-MIC 2 Bedienungsanleitung Seite 7

2
Using the provided T-Mic 2 or earhook tool, place one of the pins in the small hole on
the side of the tool. This will help to steady the pin as you line it up with the pin hole on
the T-Mic 2 or earhook.
3
Line up the pin with the hole in the T-Mic 2 or earhook and gently push it through the
hole. The pin will move from one side of the processor, through the T-Mic 2 or earhook
to the other side of the processor, holding the T-Mic 2 or earhook in place. The pin
should not come out the other side.
5