Equipment Safety Rules; Application; Personnel Safety Rules - Autool Atf705 Bedienungsanleitung

Equipment
safety rules

Application

Personnel
safety rules
Never leave the equipment unattended when it is powered on.
Always turn off the equipment at the main switch and disconnect
the power cord when not in use for its intended purpose!
Do not attempt to repair the equipment yourself.
Before connecting it to power, check that the socket voltage and
fuse ratings match the values on the nameplate. Mismatch may
cause serious hazards and equipment damage.
It is essential to protect the equipment from rainwater, moisture,
mechanical damage, overload, and rough handling.
Before use, check whether the power supply line, connecting
hoses, and adapters are damaged. Do not operate the equipment if
damaged.
Use the equipment only in compliance with all safety instructions,
technical documents, and vehicle manufacturer specifications.
When adding supplementary fluids, only use brand-new and
unopened products.
The filling oil used in the equipment may be harmful to health and
any contact must be avoided.
Always wear protective glasses when using the equipment to pro-
tect the eyes from possible splashes. In case of contact, rinse with
running water for several minutes under open eyelids. If symptoms
persist, consult a doctor.
Always wear protective gloves during work to avoid skin contact
with oils. If skin contact occurs, wash immediately with soap and
water. Remove contaminated clothing or shoes immediately.
If swallowed, seek medical advice immediately.
The temperature of car engine exhaust pipes, radiators, and other
parts can be quite high. Operators should keep a safe distance
from these hot components to prevent burns.
Always ensure that you have a stable footing so that you can safely
control the equipment in unexpected situations.
4