Maintenance Service; Maintenance - Autool Atf705 Bedienungsanleitung

MAINTENANCE SERVICE

Our products are made of long-lasting and durable materials, and we insist
on perfect production process. Each product leaves the factory after 35 pro-
cedures and 12 times of testing and inspection work, which ensures that
each product has excellent quality and performance.

Maintenance

To maintain the performance and appearance of the product, it is recom-
mended that the following product care guidelines be read carefully：
●
●
●
●
●
Be careful not to rub the product against rough surfaces or wear the prod-
uct, especially the sheet metal housing.
Please regularly check the product parts that need to be tightened and
connected. If found loose, please tighten it in time to ensure the safe oper-
ation of the equipment. The external and internal parts of the equipment
in contact with various chemical media should be frequently treated with
anti-corrosion treatment such as rust removal and painting to improve the
corrosion resistance of the equipment and extend its service life.
Comply with the safe operating procedures and do not overload the
equipment. The safety guards of the products are complete and reliable.
Unsafe factors are to be eliminated in time. The circuit part should be
checked thoroughly and the aging wires should be replaced in time.
Adjust the clearance of various parts and replace worn (broken) parts.
Avoid contact with corrosive liquids.
When not in use, please store the product in a dry place. Do not store the
product in hot, humid, or non-ventilated places.
11