Equal Exchange Of Old And New Oil - Autool Atf705 Bedienungsanleitung

2. Select the "Cycle Cleaning" function, set the cleaning time, and
then select start to confirm the cleaning of the transmission and begin
the countdown. Cleaning can also be stopped by pressing the stop
button.
Equal
●
exchange of
●
old and new
oil
●
●
Without starting the engine, select start to confirm.
●
The cleaning fluid in the new oil tank will be automatically added to the
transmission.
Important Tips
To achieve the best cleaning results, the cleaning time should be set to
more than 20mins.
During the Cycle Cleaning process, the engine should be running, and
different gears should be switched during the cleaning process, depend-
ing on the situation. Stay in each gear for approximately one minute.
When working in a high-speed gear, press the accelerator to reach a
speed of 60 kilometers/hour or more to change the high-speed gear con-
trol oil route of the automatic transmission fluid.
Add transmission fluid into the oil filler port of the equipment.
Select the "Equal Exchange" function and set the amount of fluid to be
exchanged.
Start the vehicle's engine, then select start to confirm and begin the
exchange. The interface will dynamically display relevant parameters in
real time.
Important Tips
Make sure that the oil hoses are properly connected.
The set oil exchange volume must not be larger than the amount of oil in
the new oil tank; otherwise, the machine will not operate.
During operating, set the oil replacement amount to be about 2L more
than the automatic transmission's rated oil volume. This ensures that the
automatic transmission oil is thoroughly replaced, especially if cleaning
fluid has been added to the transmission before. It can minimize the
residual cleaning fluid's damage to the seals.
During the replacement process, switch between different gears as
needed, staying in each gear for about a minute. When working in a
high-speed gear, press the accelerator to reach a speed of 60 kilometers
per hour or more to change the high-speed gear control oil route of the
automatic transmission fluid.
9