Safety Rules; General Safety Rules; Handling; Electrical Safety Rules - Autool Atf705 Bedienungsanleitung

SAFETY RULES

General
safety rules

Handling

Electrical
safety rules
Always keep this user manual with the machine.
Before using this product, read all the operational instructions in
this manual. If you have any questions, feel free to contact us or our
dealers.Failure to follow them may result in electric shock and irrita-
tion to skin and eyes.
Each user is responsible for installing and using the equipment
according to this user manual. The supplier is not responsible for
damage caused by improper use and operation.
This equipment must only be operated by trained and qualified per-
sonnel. Do not operate it under the influence of drugs, alcohol, or
medication.
This machine is developed for specific applications. The supplier
points out that any modification and/or use for any unintended
purposes is strictly prohibited.
The supplier assumes no express or implied warranties or liabilities
for personal injury or property damage caused by improper use,
misuse, or failure to follow safety instructions.
This tool is intended for professional use only. Non-professional
operation may result in injury to personnel or damage to tools or
workpieces.
Keep out of reach of children.
When operating, ensure nearby personnel or animals maintain a
safe distance. Avoid working in rain, water, or damp environments.
Keep the work area well-ventilated, dry, clean, and bright.
Used/damaged equipment must not be disposed of in household
waste but must be disposed of in an environmentally friendly
manner. Use designated electrical equipment collection points.
Waste oil should be treated as hazardous waste, for example, it
should be processed at a pollution recovery site.
Do not twist or severely bend the power cord. It may damage the
internal wires. If the power cord shows signs of damage, do not use
the products. Damaged cables pose a risk of electric shock. Keep
the power cord away from heat sources, oil sources, sharp edges,
and moving parts. Damaged power cords must be replaced by the
manufacturer, its technician, or similarly qualified personnel to pre-
vent dangerous situations or injuries.
3