AENO RC7S Schnellstartanleitung Seite 13

5. Remove debris from the HEPA filter and pre-filter using a dry brush or cloth
(Fig. E-4).
6. Remove the side brush and fabric cover from the vacuum cleaner and rinse
with warm water (Fig. E-5).
7. Remove hair and debris from the roller brush using the vacuum cleaner care
brush (included) (Fig. E-6).
Dry the component parts away from heaters. Make sure that all the component
parts, as well as the nozzles and brushes, are completely dry before reinstalling.
Troubleshooting
 The vacuum cleaner won't charge. Possible causes: the socket is faulty; the
charging base is not plugged in; the contacts on the base and/or vacuum
cleaner are dirty. Solution: check the socket by connecting another device
to it, if necessary, connect the power cord to a serviceable socket; check the
connection of the power cord to the base and to the mains; wipe the
contacts with a dry soft cloth.
 The vacuum cleaner returns to the base until cleaning is complete. Possible
cause: the battery charge is less than 20 %. Solution: charge the vacuum cleaner.
 The suction power has decreased. Possible causes: dust container is full;
roller brush is clogged. Solution: clean the dust container and/or roller brush.
ATTENTION! If none of the suggested solutions helped you eliminate the
problem, contact the supplier or an authorized service center. Do not
disassemble the device or attempt to repair it yourself.
ASBISC reserves the right to modify the device and to revise and change this document without
prior notice to users.
The warranty period and service life is 2 years from the date of retail sale of the product.
Manufacturer: ASBISC Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus. Made
in China. The date of manufacture is marked on the package.
All trademarks and trade names used herein are the property of their respective owners. Up-to-
date information and a detailed description of the device, as well as connection instructions,
certificates, information about companies that accept quality claims and warranties, are available
for download at aeno.com/documents.
SIMPLIFIED DECLARATION OF CONFORMITY. Hereby, ASBISC declares that the device is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available
at the following internet address: aeno.com/userfiles/files/Certificates/CE/RC7S-RC8S.pdf.
RoHS Directive. The device complies with the requirements of the Directive 2011/65/EU on the
Restriction of Hazardous Substances (RoHS), including the requirements of the RoHS Directive
2015/863/EU.
aeno.com/documents 13